If you need a baby gift or just want an easy sewing project, these burp cloth shapes can be cut in minutes and sewn quickly and easily! Make it personal! The GO! Burp Cloth is designed to  work with appliqué shapes that are 7" x 5" or smaller,  such as the GO! Carefree Uppercase and Lowercase (55092, 55491) Alphabet sets, or embellish your  burp cloths with embroidery.

AQ Cutting Mat Required: GO! Cutting Mat, 10 in. x 24 in. (25.4 cm x 61 cm)

How to Die Cut Burp Cloths: 

For best cutting results, position fabric on the lengthwise grain (straight of grain) as it goes under the roller. 

TIP: The die is designed to cut three complete burp cloths in one pass through the cutter. 

• For each color: Cut 1—19” x width of fabric (WOF) strip. Fanfold to 9 1/2” on die. Sub cut into 3 burp cloth pieces of each fabric. (6 total pieces)

Why Quilters Love the GO! Burp Cloth Die:

• Due to popular demand, the GO! Burp Cloth die is now available in both GO! And Studio. 
• GO! Burp Cloth is a DIY (“do-it-yourself”) Project die.  These are popular shapes of projects that you make for yourself, to give as gifts or to sell. 
• To template required.  The GO! Burp cloth die includes a perfectly symmetrical, standard-sized burp cloth shape that is typically difficult to cut by hand. 
• Cut three complete burp cloths in one pass thru the cutter (two cuts needed per burp cloth). 
• Make burp cloths out of a variety of fabrics cut with your GO! Burp Cloth die: flannel, terry cloth, waffle, fabric, Cuddle® fabrics, cotton and more!
• Packaging includes a free pattern to get your started. 
• Fat Quarter Friendly.

AccuQuilt Benefits: 

• Cut so much more fabric in less time. 
• Get accurate cuts every time -- No slipping rulers or mistakes
• Easiest to use -- Simply place die on cutter, then fabric and cutting mat on top
• Save fabric with Two Tone Foam -- Get more out of your fabric by placing it only over the shape you want to cut. 
• Safe to use -- No blades come anywhere near your fingers.

Die Tips:

• With some fabrics, after cutting, a thread or two will remain where die blades meet. Snip threads with scissors.
• Use cutting mats that matches size of each die.
• For best results, cut with die blades running under roller at an angle. Do not cut with blades parallel to roller.
• Blades on some dies are positioned at an angle. Align fabric to edge of shape, not edge of die board.
• Some dies feature specially designed corners to aid in alignment and pre-cutting.
• For fast applique, apply fusible web to fabrics, then cut shapes with dies.
• Use good quality fabric to reduce fabric stretch.
• It's always a good idea to test cut one shape before cutting many shapes to ensure fabric orientation is correct.