Binding your project with a little extra flair has never been easier! This die features the two strips you need to create a fun machine binding with two different fabrics. What could be better?

AQ Cutting Mat Required: GO! Cutting Mat, 6 in. x 12 in. (15.2 cm x 30.4 cm)

How to Create Flange Binding the AccuQuilt Way:

• Step 1: Sew 1 1/2" strips together to desired length and press seams open. Sew 1 3/4" strips together to desired length and press seams open.
• Step 2: With right sides together, layer 1 1/2" strip on top of 1 3/4" aligning to one long edge. Sew together with ¼" seam allowance. Press seams towards 1 1/2" strip.
• Step 3: Fold strips wrong sides together, align the raw edges, and press. Strip should be 13 /8" wide with 1/8" of the larger strip showing.
• Step 4: Place binding with smaller strip side down on the back of quilt and align raw edges. Sew binding on with a 1/4" seam allowance.
• Step 5: Flip binding to the front. Stitch on the seam of the binding to secure.

Why Quilters Love the GO! Flange Binding Die:

• Flange binding is a favorite technique for adding machine finished binding to quilt projects. This technique not only gives you an attractive machine finish, but it creates a wonderful accent to the whole quilt project. The GO! Flange Binding die makes it easy to cut perfect strips for flange binding, sashing, narrow borders and more!
• The flange is made by sewing a 1½" main fabric strip and a contrasting 1¾" accent fabric strip together to create the binding.
• GO! Flange Binding includes ¼" seam allowances for easy alignment and piecing.
• Cut perfect 1¼" and 1¾" strips, then use the angled guidelines to cut squares and diamonds.
• Die blades are 23" long and are open at both ends to allow cutting of fabric that is still folded as it comes off the bolt.
• Cut strips out of a variety of fabrics: cotton, batiks, flannel, fleece, Cuddle® fabrics and more!
• Free pattern downloads available to get you started.

AccuQuilt Benefits: 

• Cut so much more fabric in less time. 
• Get accurate cuts every time -- No slipping rulers or mistakes
• Easiest to use -- Simply place die on cutter, then fabric and cutting mat on top
• Save fabric with Two Tone Foam -- Get more out of your fabric by placing it only over the shape you want to cut. 
• Safe to use -- No blades come anywhere near your fingers

Die Tips: 

• With some fabrics, after cutting, a thread or two will remain where die blades meet. Snip threads with scissors. 
• Blades on some dies are positioned at an angle.  Align fabric to edge of shape, not edge of die board. 
• Use good quality fabric to reduce fabric stretch. 
• It's always a good idea to test cut one shape before cutting many shapes to ensure fabric orientation is correct.